Ionpure Electrodeionization Products

Home Products Services Support Info Contacts

Home

New VNX-HH Module
Features highest
feedwater hardness
tolerance in the industry!
Click Here for more info!

Please Login

Product Catalog

Categories > VNX Modules

The VNX module was developed to reduce the cost of building high flow rate CEDI systems and to make it easy to choose a clean, environmentally compatible technology over chemically regenerated mixed bed ion exchange systems. Higher flowrate CEDI modules result in easier piping and system assembly by reducing the number of modules required.

In both the LX and VNX, the spacers are stacked up in a conventional plate-and-frame arrangement, with alternating product and reject compartments (see Exploded Views below). This configuration gives much more even distribution of both fluid flow and current flow than some other configurations, such as spiral wound. This is very important for both performance and module longevity.

To view System Piping and Instrumentation Drawings (PID's) for the VNX family, please click on the links below (please note that you must be a Registered User of this website to view):

Click Here to view VNX50-2 PID's

Click Here to view VNX-HH PID's

Click to see larger view!!!

There are 9 Products in this category
Pages: 1

Category: VNX Modules
	VNX50HH-2 NEW!!!! Click on the model for specifications. Performance has been optimized for higher feed water hardness up to 2 ppm (as CaCO₃) for the power industry!...
	VNX25-2 Click on the model for specifications. Designed for mid-range flow systems (>25 gpm, 5.7 m3/h) in the Power and Microelectronics industies. ...
	VNX50-2 Click on the model for specifications. Designed for high flow systems (>50 gpm, 11.4 m3/h) in the Power and Microelectronics industies....
	VNX50E-2 Click on the model for specifications. Features are: >17.5 or 18 megohm-cm product quality guaranteed 98.5-99% water recovery 95% removal of boron and silica 99.8% removal of sodium and chloride Concentration recirculation not required Brine injection not required 100 psi, 113 deg F (45 deg C) continuous operation Patented all-filled concentrating compartments
	VNX50EX-2 Click on the model for specifications. Features are: >17.5 or 18 megohm-cm product quality guaranteed 95-97.5% water recovery 99% removal of boron and silica 99.9+% removal of sodium and chloride Concentration recirculation not required Brine injection not required 100 psi, 113 deg F (45 deg C) continuous operation Patented all-filled concentrating compartments
	VNX-X3 Modules (replaced with VNX50-2) This model has been replaced by the VNX50-2. When replacing an existing VNX-X3 with a VNX50-2, piping modifications will need to be made based upon the change in fitting styles. Please contact Ionpure technical support for further information. ...
	VNX50-1 (Replaced by VNX50-2) Click on the model for specifications. Designed for high flow systems (>50 gpm, 11.4 m3/h) in the Power and Microelectronics industies....
	VNX50-E （Replaced by VNX50E-2) Click on the model for specifications. Features are: > 17.5 or 18 megohm-cm product quality guaranteed 98.5-99% water recovery 95% removal of boron and silica 99.8% removal of sodium and chloride Concentration recirculation not required Brine injection not required 100 psi, 113 deg F (45 deg C) continuous operation Patented all-filled concentrating compartments Low operating costs ...
	VNX50-EX (Replaced by VNX50EX-2) Click on the model for specifications. Features are: > 17.5 or 18 megohm-cm product quality guaranteed 95-97.5% water recovery 99% removal of boron and silica 99.9+% removal of sodium and chloride Concentration recirculation not required Brine injection not required 100 psi, 113 deg F (45 deg C) continuous operation Patented all-filled concentrating compartments Low operating costs ...